Surron Light Bee QS8 Power Harness
Surron Light Bee QS8 Power Harness
Couldn't load pickup availability
Share
Upgraded QS8 Power Harness for Surron Light Bee
- This Product is made to allow use of an aftermarket battery with a QS8 Connector
- 6 AWG Wire
- Bypass the Stock Surron Breaker and install an Upgraded QS8 Power Harness
- Works with all Upgraded controllers ( not meant for stock controllers )
- *Always double check your wires match the Power Harness before connecting to the battery or controller!!*
Installation Notes:
The Power Harness comes pre soldered with a QS8 Male connector & a 2 pin male connector for 12V voltage converter connection. The other end of the Power Harness has 2 Ring terminal connectors with M6 holes to bolt to your aftermarket controller like the EBMX X-9000Â
* DISCLAIMER, ALWAYS DOUBLE CHECK YOUR CONNECTIONS WITH A VOLT METER TO CONFIRM CORRECT WIRING BEFORE CONNECTING ANYTHING TO LIVE POWER!! *
How to Use the QS8 Power Harness
Plug the connector halfway into the battery, wait 5 seconds then push them all the way together. This method prevents any arching / sparking that could cause harm to your controller. The QS8 Connector does have built in anti spark, but its best to use this method when plugging the QS8 in to avoid any sparking / arching.
Ships from USA!
Please be aware that many electric bikes sold by RegenRides, its partners, and wholesalers are intended exclusively for off-road use at their speed and power factory setting. Bypassing or modifying the bike restrictions does not adhere to proper use and as the owner, you will assume full responsibility and liability. It is important to acknowledge that these vehicles may not adhere to specific national, federal, provincial, and/or local laws or regulations.
As the buyer, it is your responsibility to thoroughly acquaint yourself with any potential restrictions that may apply to the usage of such a product in your specific location. You assume complete liability for the choices you make regarding its utilization and any potential ramifications that may arise as a result.
This vehicle is not an "electric assisted bicycle" as defined by North Carolina Motor Vehicle Code and is instead a type of motor vehicle and subject to applicable motor vehicle laws if used on public roads or public lands. Your insurance policies may not provide coverage for accidents involving the use of this vehicle. To determine if coverage is provided you should contact your insurance company or agent.