1 2

Surron Light Bee 220mm Brake Rotor Upgrade

Surron Light Bee 220mm Brake Rotor Upgrade

$59.99 USD
$69.99 USD $59.99 USD
Sale Sold out
Version

220mm x 2.3mm Upgraded Brake Rotors for Surron Light Bee

Get consistent braking without hesitation.
This rotor brings real bite to the Light Bee with a custom flame design that moves air across the braking surface and clears dust fast. The 2.3 millimeter thickness adds thermal mass for longer pulls without fade while staying friendly with stock calipers, common MTB calipers, and moto style setups.

Specs:

  • 220mm diameter for consistent brake modulation and stronger braking force than stock 203mm rotors

  • 2.3mm thickness for superior heat dissipation and consistent braking feel

  • Our custom flame design improves airflow and rids brake pad dust faster

  • Made from 12CR13 stainless steel

  • Matches the Light Bee front (44mm) and rear (54MM) bolt patterns

Fits:

  • Surron Light Bee ( all years ), Eride Pro SS ( Not 3.0 or SR ), Ventus One, 79Bike

Install Guide

  1. Remove the wheel.

  2. Warm each rotor bolt just enough to soften thread locker.

  3. Remove bolts and lift the old rotor away.

  4. Apply a light bead of blue thread locker to clean bolts.

  5. Seat the new rotor and hand snug all bolts in a star pattern.

  6. Torque each bolt to spec with a torque wrench.

  7. Refit the wheel and spin to confirm clearance.

  8. Install fresh pads and bed everything in with slow controlled stops.

READ THIS!

  • Always use fresh pads for best bite and proper bedding.

  • If you run a moto brake bracket designed for a 240mm rotor, this 220mm size will not allows the pads to bite correctly, please purchase this 240MM Rotor for moto brakes!

FAQ

Q: Does this fit the Ultra Bee
A: No. This version is for the Surron Light Bee.

Q: Will it rub in an MTB style caliper
A: Most modern calipers accept 2.3 millimeter rotors. Center your caliper and verify clearance.

Q: Do I need new pads
A: Highly recommended. New pads plus a proper bed in gives the strongest bite and least noise.

Q: What direction should the flame face
A: Look for the text lasered onto the rotor, the text should be facing you when you mount the rotor

Ships from USA

View full details

Please be aware that many electric bikes sold by RegenRides, its partners, and wholesalers are intended exclusively for off-road use at their speed and power factory setting. Bypassing or modifying the bike restrictions does not adhere to proper use and as the owner, you will assume full responsibility and liability. It is important to acknowledge that these vehicles may not adhere to specific national, federal, provincial, and/or local laws or regulations.

As the buyer, it is your responsibility to thoroughly acquaint yourself with any potential restrictions that may apply to the usage of such a product in your specific location. You assume complete liability for the choices you make regarding its utilization and any potential ramifications that may arise as a result.

This vehicle is not an "electric assisted bicycle" as defined by North Carolina Motor Vehicle Code and is instead a type of motor vehicle and subject to applicable motor vehicle laws if used on public roads or public lands. Your insurance policies may not provide coverage for accidents involving the use of this vehicle. To determine if coverage is provided you should contact your insurance company or agent.