Surron Foot Lock Shift Lock Peg for Light Bee
Surron Foot Lock Shift Lock Peg for Light Bee
Couldn't load pickup availability
Share
Lock in and ride it out
If you like to lift the front and play on balance, this is the little part that makes a big difference. Our Surron foot lock keeps your shoe planted so you can work the brake and body position without slipping off. CNC cut from 6061 T6 aluminum, clean fit, takes hits, and installs in minutes.
Highlights
-
CNC machined 6061 T6 aluminum bracket
-
Secure peg surface for confident wheelies and balance work
-
Includes hardware: 3 bolts and 2 spacers, 1 CNC peg, 1 shift lock bracket
-
Direct fit for Surron Light Bee
-
Smooth edges and a clean machined finish
-
Ships fast from USA
What it does
Foot stays where you want it. More control when you’re on balance. Better leverage on the rear brake. Fewer saves with a dangling toe.
Specs
| Item | Detail |
|---|---|
| Material | 6061 T6 aluminum, CNC machined |
| Kit contents | Shift Lock peg, 3 bolts, 2 spacers |
| Fitment | Surron Light Bee (LBX) |
| Finish | Anodized |
Compatibility
Built for the Surron Light Bee. Riders use it mainly for wheelies and balance practice. If you run aftermarket peg brackets it may sit higher then normal, but still functions the same.
Install Guide
-
put the bike on a stand or resting on its kickstand.
-
Remove the 2 bolts holding on your bash guard ( on left or right side depending which side you choose to mount the foot lock.
- Unscrew the plastic cap on the end of the lock peg, put the shorter bolt into the peg and use an M6 Allen Key to tighten it into the bracket.
- Then send the 2 longer bolts through the bracket and put the spacer over the threads sticking out on the other side of the bracket
- hand tighten both bolts through your frame and into your bash guard.
- Last make sure both bolts are torqued to spec and take it for a rip!
FAQs
Does this come with all hardware?
Yes. You get the peg, three bolts, and two spacers.
Left or right side?
Most riders run it on the shifter side. However our Shift Lock is made to be universal and can be mounted on either side!
Any special tools?
You only need a 5MM & 6MM Allen Key for this install!
Will it scratch the frame?
Installed correctly with the spacers it sits solid. Always check for rubbing after your first ride.
What bikes does it fit?
It’s made for the Surron Light Bee. If you need a version for other platforms, shoot us a message and we’ll point you right!
Ships from USA.
Please be aware that many electric bikes sold by RegenRides, its partners, and wholesalers are intended exclusively for off-road use at their speed and power factory setting. Bypassing or modifying the bike restrictions does not adhere to proper use and as the owner, you will assume full responsibility and liability. It is important to acknowledge that these vehicles may not adhere to specific national, federal, provincial, and/or local laws or regulations.
As the buyer, it is your responsibility to thoroughly acquaint yourself with any potential restrictions that may apply to the usage of such a product in your specific location. You assume complete liability for the choices you make regarding its utilization and any potential ramifications that may arise as a result.
This vehicle is not an "electric assisted bicycle" as defined by North Carolina Motor Vehicle Code and is instead a type of motor vehicle and subject to applicable motor vehicle laws if used on public roads or public lands. Your insurance policies may not provide coverage for accidents involving the use of this vehicle. To determine if coverage is provided you should contact your insurance company or agent.