Hope Tech 4 V4 Brake Pads Copper Sintered
Hope Tech 4 V4 Brake Pads Copper Sintered
Couldn't load pickup availability
Share
Copper sintered Hope Tech 4 V4 brake pads built for strong bite and steady feel in heat and wet. Direct replacement that drops in clean with OEM sizing. One set services one caliper and includes a new spring and pin for a full refresh.
Features for Hope Tech 4 Brakes
• Strong initial bite with predictable power on long descents
• Heat stable copper compound resists fade in repeated braking
• Direct fit for V4 calipers so the swap is quick and clean
• Includes new spring and pin so hardware is refreshed with the pads
Spec Table
Compound: Copper sintered
Pad Shape: Hope V4
Compatibility: Hope Tech 4 V4 and Tech 3 V4 calipers
Not Compatible: Hope E4 and calipers that do not use V4 pads
Included: One pad set for one caliper, one pad spring, one pad pin
Pack Options: 1 set, 2 sets, 4 sets
Install Guide
Difficulty: easy
Time: 5 to 10 minutes
Tools: Allen key set, flathead screwdriver
-
Loosen the two caliper bolts so the caliper can move slightly
-
Remove the pad pin or pad bolt and slide out the old pads and spring
-
Use a flathead to press the pistons fully back into the caliper
-
Slide in the new pads with the new spring and reinstall the pad pin
-
Center the caliper on the rotor and tighten the two bolts evenly
-
Pump the lever to seat the pads against the rotor
-
Bed the pads with 20 to 30 controlled stops from low to moderate speed
Torque Notes: Tighten caliper bolts and pad pin to manufacturer spec
Safety: Keep pad faces and rotor clean. Do not touch friction surfaces. Test brakes at low speed before riding hard.
FAQs
Does this fit Hope Tech 4 V4 and Tech 3 V4 calipers
Yes. It fits both V4 calipers. It is not for Hope E4.
What makes this an upgrade over stock
The copper sintered compound offers a stronger initial bite and better heat stability than ceramic options while keeping OEM sizing for an easy swap.
Do I need to bleed the system
No. A pad change does not require a bleed unless the lever feels soft or the hydraulic system was opened.
Will this help with brake fade or wheelie control
Yes. The copper compound resists fade and delivers predictable modulation so you can hold the rear with confidence.
What is included in the box
One set of pads for one caliper plus a new pad spring and a pad pin.
Ships From USA!
Please be aware that many electric bikes sold by RegenRides, its partners, and wholesalers are intended exclusively for off-road use at their speed and power factory setting. Bypassing or modifying the bike restrictions does not adhere to proper use and as the owner, you will assume full responsibility and liability. It is important to acknowledge that these vehicles may not adhere to specific national, federal, provincial, and/or local laws or regulations.
As the buyer, it is your responsibility to thoroughly acquaint yourself with any potential restrictions that may apply to the usage of such a product in your specific location. You assume complete liability for the choices you make regarding its utilization and any potential ramifications that may arise as a result.
This vehicle is not an "electric assisted bicycle" as defined by North Carolina Motor Vehicle Code and is instead a type of motor vehicle and subject to applicable motor vehicle laws if used on public roads or public lands. Your insurance policies may not provide coverage for accidents involving the use of this vehicle. To determine if coverage is provided you should contact your insurance company or agent.